Tuesday, March 9, 2010

Spray paint temporary fabric enclosures?

I need an enclosure for spray painting offices and apartments, so i can spray inside a room, put some kind of door and use some fume extracting system, any ideas or internet sites where i can find such a thing???Spray paint temporary fabric enclosures?
I build temporary spray paint booths from pine 2x2 lumber and clear pit lining plastic or heavy drop cloth. Then just cut a hole in one end for a box fan and in the other for an inlet vent. I cover the inlet vent hole with a furnace filter. NOTE: box fan not safe with oil based paint. explosion hazard. Use with water based paint only.Spray paint temporary fabric enclosures?
For the fumes you can make your own. It must be vented to an outside opening ( door , window ) just get a higher volume fan and make an frame that will fit tight to door or window opening. Point the fan to blow out and your up and going
Don't know of a site, but with a baby in the house we used 1'; x 2'; boards and stapled plastic over it to limit the fumes getting to the rest of the house, we took off the door trim to paint anyway, so we just used a few nails to tack the 1'; x 2'; to the door frame, stapled the plastic to the 1'; x 2'; and then would pull one side lose to make an exit and could staple it back shut on retry. We used an open window and a fan was our ventilation system.
  • pores
  • No comments:

    Post a Comment